Netgear XSM4324FS User Manual - Page 315

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure the Secondary IP Address To configure the secondary IP address: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IP > Advanced > Secondary IP. 5. In the Routing Interface list, select the interface. 6. In the Secondary IP Address field, add a secondary IP address to the selected interface. 7. In the Secondary IP Subnet Mask field, enter the subnet mask associated with the secondary IP address. This is also referred to as the subnet/network mask, and defines the portion of the interface's IP address that is used to identify the attached network. This value is read-only once configured. 8. Click the Add button. The secondary IP address for the selected interface is added. The following table describes the nonconfigurable information that is displayed. Table 112. Secondary IP Field VLAN ID Primary IP Address Description The VLAN ID associated with the displayed or configured interface. The primary IP address for the interface. Manage Routing 315 User Manual