Netgear XSM4324FS User Manual - Page 437

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > IGMP > Proxy Interface Configuration. 5. Use the Interface list to select the port. At least one router interface must be configured before you configure or display data for an IGMP proxy interface, and it must not be an IGMP routing interface. 6. Select Enable or Disable from the Admin Mode list. This sets the administrative status of IGMP proxy on the selected interface. The default is Disable. Routing, IGMP and Multicast global admin modes must be enabled to enable IGMP proxy interface mode. 7. In the Unsolicited Report Interval field, enter the unsolicited time interval value in seconds. The unsolicited report interval is the time between repetitions of a host's initial report of membership in a group. Valid values are from 1 to 260. The default value is 1. 8. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 164. Multicast IGMP Proxy Interface Configuration Field IP Address Subnet Mask Description The IP address of the IGMP proxy interface. The subnet mask for the IP address of the IGMP proxy interface. Configure Multicast Routing 437 User Manual