Netgear XSM4324FS User Manual - Page 75

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 22. DayLight Saving - Recurring Field Description Offset Configure recurring offset in minutes. The valid range is 1-1440 minutes. Zone Configure the time zone. The fields in the following table are visible only when DayLight Saving is Non Recurring. Table 23. DayLight Saving - Non Recurring Field Begins At Ends At Offset Zone Description These fields are used to configure the start values of the date and time. • Week. Configure the start week. • Day. Configure the start day. • Month. Configure the start month. • Hours. Configure the start hours. • Minutes. Configure the start minutes. These fields are used to configure the end values of date and time. • Week. Configure the end week. • Day. Configure the end day. • Month. Configure the end month. • Hours. Configure the end hours. • Minutes. Configure the end minutes. Configure the non-recurring offset in minutes. The valid range is 1-1440 minutes. Configure the time zone. View the DayLight Saving Time Status To view the DayLight Saving Time status: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Time > DayLight Saving Configuration. Configure System Information 75 User Manual