Netgear XSM4324FS User Manual - Page 429

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 159. DVMRP Prune (continued) Field Source Mask Expiry Time Description The network mask used with the source IP address. The amount of time remaining before this prune will expire at the upstream neighbor. If no prune messages were received from downstream neighbors, this is set to the value of the default prune lifetime timer; otherwise, it is set to the smallest received value or the default timer, whichever is less. View the DVMRP Route To view the multicast DVMRP route: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > DVMRP > DVMRP Route. 5. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 160. DVMRP Route Field Source Address Source Mask Upstream Neighbor Description The network address that is combined with the source mask to identify the sources for this entry. The network subnet mask used with the source IP address to identify the sources for this entry. The address of the upstream neighbor (for example, RPF neighbor) from which IP datagrams from these sources are received. Configure Multicast Routing 429 User Manual