Netgear XSM4324FS User Manual - Page 343
Con Advanced RIP Interface Settings, Host Routes Accept Mode
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 343 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches 6. Select a Split Horizon Mode radio button: • None. No special processing for this case. • Simple. A route is not included in updates sent to the router from which it was learned. The default is Simple. • Poison Reverse. A route is included in updates sent to the router from which it was learned, but the metric is set to infinity. Split horizon is a technique for avoiding problems caused by including routes in updates sent to the router from which the route was originally learned 7. In the Auto Summary Mode field, select the Enable or Disable option. If you select Enable, groups of adjacent routes are summarized into single entries reduce the total number of entries. The default is Disable. 8. In the Host Routes Accept Mode field, select the Enable or Disable option. If you select Enable, the router accepts host routes. The default is Enable. 9. In the Default Information Originate field, select to Enable or Disable default route advertisement. 10. In the Default Metric field, specify a default value for the metric of redistributed routes. This field displays the default metric if one has already been set, or 0 if one was not configured earlier. The valid values are 1 to 15. 11. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 122. RIP Advanced Configuration Field Global Route Changes Global Queries Description The number of route changes made to the IP route database by RIP. This does not include the refresh of a route's age. The number of responses sent to RIP queries from other systems. Configure Advanced RIP Interface Settings To configure advanced RIP interface settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. Manage Routing 343 User Manual