Netgear XSM4324FS User Manual - Page 234

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. To refresh the page with the latest information on the switch, click the Refresh button. The Status field displays Neither PVST nor Rapid-PVST is enabled. If you change the STP mode to PVST or to RPVST, the page displays statistic information. Manage Multicast Multicast IP traffic is traffic that is destined to a host group. Host groups are identified by class D IP addresses, which range from 224.0.0.0 to 239.255.255.255. View the MFDB Table The Multicast Forwarding Database holds the port membership information for all active multicast address entries. The key for an entry consists of a VLAN ID and MAC address pair. Entries can contain data for more than one protocol. To view the MFDB Table: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching > Multicast > MFDB > MFDB Table. Configure Switching Information 234 User Manual