Netgear XSM4324FS User Manual - Page 250

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure MLD Snooping Automatically with MLD Plus Mode MLD Plus mode lets you automatically configure MLD snooping, which is used to build forwarding lists for multicast traffic. You can also configure MLD snooping manually (see Configure MLD Snooping Manually on page 251). To configure MLD snooping automatically: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> Multicast > MLD Snooping > Configuration. 5. Select the MLD Plus Mode Enable or Disable radio button. If enabled, the following MLD snooping modes are automatically enabled: • MLD Snooping Admin mode • Exclude Mrouter Interface Mode The default is Enable. Configure Switching Information 250 User Manual