Netgear XSM4324FS User Manual - Page 47

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the USB Directory Details information. Table 14. USB Directory Details information Field File Name File Size Modification Time Description The name of the file stored in the USB flash drive. The size of the file stored in the USB flash drive in bytes The last modification time of the file stored in the USB flash drive. Configure and View Information About Slots and Port Cards You can configure information about the port cards that are installed in the switch's slots and view information about the port cards and other switches that are compatible with the switch. To configure and view information about slots and port cards: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Slot Information. The previous figure does not show all columns on the page. Note: In the previous example for model M4300-96X, a third-party HDMI port card is shown in slot 1/5. You can insert a third-party HDMI port card in any of the upper slots (1-6), but not in the lower slots. Configure System Information 47 User Manual