Netgear XSM4324FS User Manual - Page 344

M4300 Intelligent Edge Series Fully Managed Stackable Switches The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > RIP > Advanced > Interface Configuration. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure. 6. From the Send Version list, select the version of RIP control packets that the interface will send. The value is one of the following: • None. No RIP control packets are sent. • RIP-1. Send RIP version 1 formatted packets through broadcast. • RIP-1c. RIP version 1-compatibility mode. Send RIP version 2-formatted packets through broadcast. • RIP-2. Send RIP version 2 packets using multicast. The default is RIP-2. 7. From the Receive Version list, select which RIP control packets the interface accepts. The value is one of the following: • RIP-1. Accept only RIP version 1-formatted packets. • RIP-2. Accept only RIP version 2-formatted packets. • Both. Accept packets in either format. The default is Both. • None. No RIP control packets are accepted. Manage Routing 344 User Manual