Netgear XSM4324FS User Manual - Page 497

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure. 6. Policy Name. Lists all the policy names from which one can be selected. This field is not shown for read/write users where the inbound service policy attachment is not supported by the platform. 7. Click the Apply button. Your settings are saved. Table 189. Service Interface Configuration Field Direction Operational Status Description Shows that the traffic direction of this service interface is In. Shows the operational status of this service interface, either Up or Down. View DiffServ Service Statistics This page displays class-oriented statistical information for the policy, which is specified by the interface and direction. The Member Class list is populated on the basis of the specified interface and direction and hence the attached policy (if any). Highlighting a member class name displays the statistical information for the policy-class instance for the specified interface and direction. To view the DiffServ service statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. Configure Quality of Service 497 User Manual