Netgear XSM4324FS User Manual - Page 243

M4300 Intelligent Edge Series Fully Managed Stackable Switches • Proxy Querier • Querier Election Mode • Installs reserved Multicast MAC addresses into the system. If disabled, these IGMP snooping modes are automatically disabled for the VLAN. Note: For information about other settings on the page, see Configure IGMP Snooping for VLANs Manually on page 243. 7. Click the Apply button. Your settings are saved. Configure IGMP Snooping for VLANs Manually You can manually configure the settings for IGMP snooping for VLANs, which is used to build forwarding lists for multicast traffic. You can also configure IGMP snooping for VLANS automatically (see Configure IGMP Snooping for VLANs Automatically with IGMP Plus Mode on page 242). To configure the settings for IGMP snooping for VLANs manually: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> Multicast > IGMP Snooping > IGMP VLAN Configuration. 5. To enable IGMP snooping on a VLAN, do the following: a. Select the check box next to the VLAN ID. b. Configure the IGMP snooping settings: • Admin Mode. From the menu, select to enable or disable IGMP snooping for the VLAN. The default is Disable. • Fast Leave. From the menu, select to enable or disable the IGMP snooping fast leave mode for the VLAN. This selection enables or disables the automatic assignment of fast-leave messages for all members of the VLAN. The default is Enable. Configure Switching Information 243 User Manual