Netgear XSM4324FS User Manual - Page 292

M4300 Intelligent Edge Series Fully Managed Stackable Switches The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> L2 Loop Protection > L2 Loop Protection Configuration. 5. In the Global L2 Loop Protection Configuration section, configure the following settings: • Next to Admin Mode, select the Enable or Disable radio button to specify the administrative mode of loop protection on the switch. By default, loop protection is globally disabled. • From the Transmit Interval menu, select the interval between the transmissions of loop packets on a port. The range is from 1 to 5 seconds. The default setting is 5 seconds. The selected interval applies to all ports for which you enable loop protection. • From the Max PDU Receive menu, select the maximum number of packets that a port can receive before an action is taken. The default setting is 1 packet. The selected number of packets applies to all ports for which you enable loop protection. 6. Click the Apply button. Your settings are saved. Configure Switching Information 292 User Manual