Netgear XSM4324FS User Manual - Page 127

M4300 Intelligent Edge Series Fully Managed Stackable Switches 4. Select System > PoE > Advanced > Power Configuration. 5. In the Power Status section, from the Unit ID menu, select the unit for which you want to display the power status. 6. For switch model M4300-96X only, select the Power Auto-rebalance Enable or Disable radio button. By default, the Enable radio button is selected. However, you can disable automatic power rebalancing among the PSU bays (power module slots) on switch model M4300-96X. The following table describes the nonconfigurable fields in the Power Status section. Field Total Available Power Power Modules Slot Module Name Status Power Module AC Input Description The total available power for the unit in watts. The PSU bay number (power module slot number). The power module name. The power module status, which can be one of the following: • Not Present. The power module is not present. • Operational. The power module is connected and works properly. • Failed. The switch cannot detect the power module status. The power module input voltage. 7. For switch models M4300-28G-POE+ and M4300-52G-POE+ only, in the Redundancy Mode Status section, select the N+1 Configuration Enable or Disable radio button. If you select the Enable radio button, the power redundancy feature is enabled, causing the total usable power that is delivered by all available PSUs to be less than the power that a single PSU can deliver. In such a configuration, the power load is shared evenly by all PSUs, which operate as if they are one large uninterruptible power supply. The power redundancy feature is disabled by default. Configure System Information 127 User Manual