Netgear XSM4324FS User Manual - Page 523

M4300 Intelligent Edge Series Fully Managed Stackable Switches The System Information page displays. 4. Select Security > Access > HTTPS > HTTPS Configuration. 5. Select the Admin Mode Disable or Enable radio button. This enables or disables the administrative mode of Secure HTTPS. The currently configured value is displayed. The default value is Disable. You can download SSL certificates only when the HTTPS admin mode is disabled. HTTPS admin mode can be enabled only if a certificate is present on the device. 6. Select the SSL Version 3 Disable or Enable radio button. This enables or disables Secure Sockets Layer version 3.0. The currently configured value is displayed. The default value is Enable. 7. Select the TLS Version 1.2 Disable or Enable radio button This enables or disables Transport Layer Security version 1.2. The currently configured value is displayed. The default value is Enable. 8. In the HTTPS Port field, type the HTTPS port number. The value must be in the range of 1025 to 65535. Port 443 is the default value. The currently configured value is displayed. 9. In the HTTPS Session Soft Timeout (Minutes) field, enter the inactivity time-out for HTTPS sessions. The value must be in the range of 1 to 60 minutes. The default value is 5 minutes. The currently configured value is displayed. 10. In the HTTPS Session Hard Timeout (Hours) field, set the hard time-out for HTTPS sessions. This time-out is unaffected by the activity level of the session. The value must be in the range of 1 to 168 hours. The default value is 24 hours. The currently configured value is displayed. 11. In the Maximum Number of HTTPS Sessions field, enter the maximum allowable number of HTTPS sessions. Manage Switch Security 523 User Manual