Netgear XSM4324FS User Manual - Page 468

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 182. IPv6 Multicast MLD Proxy Membership Field Proxy Interface Group IP Source Hosts Last Reporter Up Time Expiry Time State Filter Mode Number of Sources Description The interface on which the MLD proxy is enabled. The IPv6 multicast group address. Source addresses that are members of this multicast address. The IPv6 address of the source of the last membership report received for the IPv6 multicast group address on the MLD proxy interface. The time elapsed since this entry was created. The expiry time interval against each source address that is a member of this multicast group. This is the amount of time after which the specified source entry is aged out. The state of the host entry. A host can be in one of the following states: • Non-member state. Does not belong to the group on the interface. • Delaying member state. Host belongs to the group on the interface and report timer running. The report timer is used to send out the reports. • Idle member state. Host belongs to the group on the interface and no report timer is running. The group filter mode (Include/Exclude/None) for the specified group on the MLD proxy interface. Possible modes are as follows: • Include • Exclude • None The number of source hosts present in the selected multicast group. Configure IPv6 Multicast Static Routes To configure IPv6 multicast static routes settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Configure Multicast Routing 468 User Manual