Netgear XSM4324FS User Manual - Page 613

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure Rules for an IP ACL You can display the rules for the IP access control lists (ACL) that you created. Note: An implicit deny all default rule exists as the last rule of an ACL list. This means that if an ACL is applied to a packet and if none of the explicit rules match, the final implicit deny all rule applies and the packet is dropped. To configure rules for an IP ACL: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > ACL > Advanced > IP Rules. If no rules exists, the Basic ACL Rule Table shows the message No rules have been configured for this ACL. If one or more rule exists for the ACL, the rules display in the Basic ACL Rule Table. 5. From the ACL ID menu, select the IP ACL for which you want to add or a change a rule. For basic IP ACLs, this must be an ID in the range from 1 to 99. 6. Take one of the following actions: • To add an IP ACL rule, click the Add button. • To change an existing rule, click the rule hyperlink in the Sequence Number column of the Basic ACL Rule Table. Manage Switch Security 613 User Manual