Netgear XSM4324FS User Manual - Page 477

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply a trust mode or rate to all interfaces. 6. Use the Queue ID menu to select the queue to be configured (platform based). 7. Use Minimum Bandwidth to specify the minimum guaranteed bandwidth allotted to this queue. Setting this value higher than its corresponding maximum bandwidth automatically increases the maximum to the same value. The default value is 0. Valid Range is 0 to 100 in increments of 1. The value 0 means no guaranteed minimum. Sum of individual Minimum Bandwidth values for all queues in the selected interface cannot exceed defined maximum (100). 8. Queue Management Type displays the queue depth management technique used for queues on this interface. This is used only if the device supports independent settings per queue. From the Queue Management Type menu, select either TailDrop or WRED. The default value is TailDrop. 9. Click the Apply button. Your settings are saved. Configure Quality of Service 477 User Manual