Netgear XSM4324FS User Manual - Page 347

M4300 Intelligent Edge Series Fully Managed Stackable Switches • Destination IP address and netmask • Action (permit or deny) All other fields (such as Source and Destination Port, Precedence, Tos, and so on) are ignored. The source IP address is compared to the destination IP address of the route. The source IP netmask in the access list rule is treated as a wildcard mask, indicating which bits in the source IP address must match the destination address of the route. Note: A 1 in the mask indicates a do not care in the corresponding address bit. When an access list rule includes a destination IP address and netmask (an extended access list), the destination IP address is compared to the network mask of the destination of the route. The destination netmask in the access list serves as a wildcard mask, indicating which bits in the route's destination mask are significant for the filtering operation. 9. Click the Apply button. Your settings are saved. The following table describes the RIP Route Redistribution nonconfigurable data that is displayed. Table 124. RIP Route Redistribution Summary Field Description Source Protocol The source route to be redistributed by RIP. The valid values are as follows: • Connected • Static • OSPF Redistribute Mode The route redistribution mode for a particular source protocol. By default this is disabled. Metric The metric of redistributed routes for the given source route. The field displays 0 when the metric is not configured. Distribute List The access list that filters the routes to be redistributed by the destination protocol. The field displays 0 when not configured. The following list of redistributed routes is valid when OSPF is selected as source. The list can include one or more of: Match Internal Sets internal OSPF routes to be redistributed. Match External Type 1 Sets external type 1 OSPF routes to be redistributed. Match External Type 2 Sets external type 2 OSPF routes to be redistributed. Match NSSA External Type 1 Sets NSSA external type 1 OSPF routes to be redistributed. Match NSSA External Type 2 Sets NSSA external type 2 OSPF routes to be redistributed. Manage Routing 347 User Manual