Netgear XSM4324FS User Manual - Page 86

M4300 Intelligent Edge Series Fully Managed Stackable Switches 6. Click the Apply button. Your settings are saved. Configure Green Ethernet Interface Settings To configure the Green Ethernet interface settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Green Ethernet > Green Ethernet Interface Configuration. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure 6. Use the Auto Power Down mode selection to enable or disable this option. The factory default is Enable. When the port link is down, the PHY automatically goes down for a short period of time, and then wakes up to check link pulses. This allows the switch to perform autonegotiation and save power consumption when no link partner is present. Configure System Information 86 User Manual