Netgear XSM4324FS User Manual - Page 42

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes CPU Memory Status information. Table 11. CPU Memory Status information Field Total System Memory Available Memory Description The total memory of the switch in KBytes. The available memory space for the switch in KBytes. Configure the CPU Thresholds The CPU Utilization Threshold notification feature allows you to configure thresholds that, when crossed, trigger a notification. The notification is done through SNMP trap and syslog messages. To configure the CPU thresholds: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > System CPU Status > CPU Threshold. 5. Configure the Rising Threshold value. Notification is generated when the total CPU utilization exceeds this threshold value over the configured time period. The range is 1 to 100. 6. Configure the Rising Interval value. This utilization monitoring time period can be configured from 5 to 86400 seconds in multiples of 5 seconds. Configure System Information 42 User Manual