Netgear XSM4324FS User Manual - Page 661

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Mirroring > RSPAN Source Switch Configuration. 5. Use one of the following methods to display available interfaces on the page: • Select a Unit ID (1, 2, 3) to display a list of physical ports for the selected unit. • Select LAG to display LAGs only. • Select CPU to display CPUs only. • Select VLAN to display a list of available VLAN IDs. • Select All to display all physical ports, LAGs, CPUs, and VLANs. 6. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to use as the source, or select multiple check boxes to use all selected interfaces as sources. 7. Select from the Direction list to specify the direction of the traffic to be mirrored from the configured mirrored ports. If the value is not configured, None is displayed. The default value is None. • None. The value is not configured. • Tx and Rx. Monitor transmitted and received packets. • Tx. Monitor transmitted packets only. • Rx. Monitor received packets only. Monitor the Switch and Network 661 User Manual