Netgear XSM4324FS User Manual - Page 496

M4300 Intelligent Edge Series Fully Managed Stackable Switches secondary (inner) 802.1Q tag of a double VLAN tagged packet. If the packet does not already contain this header, one is inserted. • Send. These packets are presented unmodified by DiffServ to the system forwarding element. • Mark IP Precedence. These packets are marked by DiffServ with the specified IP Precedence value before being presented to the system forwarding element. This selection requires that the Mark IP Precedence field be set. 13. If you select Two Rate, you can configure additional fields (same fields as for a simple policy). 14. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information displayed on the page. Table 188. DiffServ Policy Configuration - Policy Attribute Field Policy Name Policy Type Member Class Name Description Displays name of the DiffServ policy. Displays type of the policy as In. Displays name of each class instance within the policy. Configure the DiffServ Service Interface To configure the DiffServ service interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS > DiffServ > Advanced > Service Interface Configuration. Configure Quality of Service 496 User Manual