Netgear XSM4324FS User Manual - Page 302

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure the Routing IP Settings You can configure routing IP settings for the switch, as opposed to the IP settings for an interface. To configure the routing IP settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IP > Basic > IP Configuration. 5. Use Routing Mode to select Enable or Disable. You must enable routing for the switch before you can route through any of the interfaces. The default value is Disable. 6. Use ICMP Echo Replies to select Enable or Disable. If you select Enable, then only the router can send ECHO replies. By default ICMP Echo Replies are sent for echo requests. 7. Use ICMP Redirects to select Enable or Disable. If this is enabled globally and on an interface level, then only the router can send ICMP Redirects. 8. Use ICMP Rate Limit Interval to control the ICMP error packets by specifying the number of ICMP error packets that are allowed per burst interval. Manage Routing 302 User Manual