Netgear XSM4324FS User Manual - Page 59

M4300 Intelligent Edge Series Fully Managed Stackable Switches Your settings are saved. In the IPv6 Default Route Configuration section of the page, the nonconfigurable IPv6 Default Route that is displayed is the default route for the IPv6 VLAN interface. 13. To make changes, do the following: • To add or remove the IPv6 default route, select the Change IPv6 Default Route option, and specify the address value in the IPv6 Default Route Address field. • To reset the IPv6 management interface to the default VLAN 1, select the Set Management Interface to Default option. 14. If you make any changes, click the Apply button. Your settings are saved. By default there is no IPv6 Management Interface. The current IPv6 Management Interface Status is displayed at the bottom of the page. The table below describes the nonconfigurable fields. Table 17. Current IPv6 Management Interface Status Field Management Interface Link State IPv6 Routing Interface Status/Operational Mode Description Displays the current IPv6 management interface Indicates whether the link status is up or down. Indicates whether the link status is up or down for the management interface. Configure System Information 59 User Manual