Netgear XSM4324FS User Manual - Page 431

M4300 Intelligent Edge Series Fully Managed Stackable Switches 6. Click the Apply button. Your settings are saved. Configure the IGMP Routing Interface To configure the IGMP routing interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select the Routing> Multicast > IGMP > Routing Interface Configuration. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure. 6. In the Admin Mode field, select the Enable or Disable option to set the administrative status of IGMP on the selected routing interface. The default is Disable. 7. In the Version field, enter the version of IGMP to configure for the selected interface. Valid values are 1 to 3. The default value is 3. This field is configurable only when IGMP Interface mode is enabled. 8. In the Robustness field, enter the robustness value. Configure Multicast Routing 431 User Manual