Netgear XSM4324FS User Manual - Page 106

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Use Maximum Hop Count to enter the maximum number of hops a client request can take before being discarded. The range is (1 to 16). The default value is 4. 6. Select the Admin mode Disable or Enable radio button. When you select Enable, DHCP requests are forwarded to the IP address you entered in the Server Address field. 7. Use Minimum Wait Time to enter a Minimum Wait Time in seconds. This value is compared to the time stamp in the client's request packets, which represents the time since the client was powered up. Packets are forwarded only when the time stamp exceeds the minimum wait time. The range is (0 to 100). 8. Select the Circuit ID Option mode Disable or Enable radio button. If you select Enable, Relay Agent options are added to requests before they are forwarded to the server and removed from replies before they are forwarded to clients. 9. Click the Apply button. Your settings are saved. The following table describes the DHCP Relay Statistics fields. Table 39. DHCP Relay Status Field Requests Received Requests Relayed Packets Discarded Description The total number of DHCP requests received from all clients since the last time the switch was reset. The total number of DHCP requests forwarded to the server since the last time the switch was reset. The total number of DHCP packets discarded by this Relay Agent since the last time the switch was reset. Manage a DHCP L2 Relay Configure Global DHCP L2 Relay Settings To configure global DHCP L2 Relay settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. Configure System Information 106 User Manual