Netgear XSM4324FS User Manual - Page 677

M4300 Intelligent Edge Series Fully Managed Stackable Switches • CPU Packets Capture File. Specify CPU Packets Capture File to retrieve the stored captured CPU packets. • Factory Default Configuration. Specify Factory Default Configuration in text mode to retrieve the stored factory default configuration. The factory default is CLI Banner. 6. Click the Apply button. The file is uploaded. Upload a File from the Switch to a USB Device To use upload a file from the switch to a USB device: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Maintenance > Export > USB File Export. By default, the selection from the File Type menu is Text Configuration. The stored configuration that must be retrieved is in text mode. 5. In the File Path field, enter the path for the file to upload. You can use up to 146 characters. The default is blank. 6. Use USB File to give a name along with path for the file to upload. You can enter up to 32 characters. The factory default is blank. 7. Click the Apply button. The file is uploaded. Maintenance and Troubleshooting 677 User Manual