Netgear XSM4324FS User Manual - Page 485

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 185. DiffServ Status (continued) Field Policy table Policy Instance table Policy Attributes table Service table Description The number of configured policies out of the total allowed on the switch. The number of configured policy class instances out of the total allowed on the switch. The number of configured policy attributes (attached to the policy class instances) out of the total allowed on the switch. The number of configured services (attached to the policies on specified interfaces) out of the total allowed on the switch. Configure a DiffServ Class You can add a new DiffServ class name or rename or delete an existing class. You can also define the criteria to associate with a DiffServ class. As packets are received, these DiffServ classes are used to prioritize packets. You can use multiple match criteria in a class. The logic is a Boolean logical-AND for this criteria. After creating a class, click the class link to the Class page. To configure a DiffServ class: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS > DiffServ > Advanced > Class Configuration. Configure Quality of Service 485 User Manual