Netgear XSM4324FS User Manual - Page 537

M4300 Intelligent Edge Series Fully Managed Stackable Switches 9. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 197. Console Port Field Character Size (bits) Flow Control Stop Bits Parity Description The number of bits in a character. This is always 8. Whether hardware flow control is enabled or disabled. It is always disabled. The number of stop bits per character. It is always 1. The parity method used on the serial port. It is always None. Configure Denial of Service Settings To configure Denial of Service settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Access > Denial of Service Configuration. Manage Switch Security 537 User Manual