Netgear XSM4324FS User Manual - Page 423

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure. 6. Enter the TTL Threshold below which a multicast data packet is not forwarded from the selected interface. Enter a number between 0 and 255. The default is 1. If you enter 0, all multicast packets for the selected interface are forwarded. You must configure at least one router interface before you see this field. 7. Click the Apply button. Your settings are saved. Configure Global Multicast DVMRP Settings To configure global multicast DVMRP settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > DVMRP > Global Configuration. Configure Multicast Routing 423 User Manual