Netgear XSM4324FS User Manual - Page 48

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. For model M4300-96X only, from the Administrative State menu, select Enable or Disable. By default, all slots are enabled, but you can select to disable a slot. 6. For model M4300-96X only, from the Configured Card Model ID menu, select the port card. This option allows you to preconfigure the port card before you insert the port card. 7. For model M4300-96X, if you changed the settings, click the Apply button. Your settings are saved. The following table describes the nonconfigurable information in the Slot Configuration table. Field Slot Status Power State Card Information Configured/Actual Card Description Configured/Actual Card Power Down PoE Capable Serial Number Vendor Name Manufacturer Name FPGA Version Software Version Board Revision ID Product Name Product Description Description The unit and slot number. Indicates whether the slot is empty or full. For model M4300-96X only, the power state is always Enable. For other models, the Power State column does not display. The model of the configured port card and the model of the port card that is inserted in the slot. The description of the configured port card and the description of the port card that is inserted in the slot. If the value is True, the power state can be administratively enabled or disabled. If the value is False, the power state cannot be configured. Indicates whether the port card is PoE-capable. The serial number of the installed port card. The vendor name of the installed port card. The manufacturer name of the installed port card. The FPGA (Field Programmable Gate Array) version of the installed port card. The software version of the installed port card. The board revision ID of the installed port card. The product name of the installed port card. The detailed product description of the installed port card. Configure System Information 48 User Manual