Netgear XSM4324FS User Manual - Page 655

M4300 Intelligent Edge Series Fully Managed Stackable Switches Globally Configure Multiple Port Mirroring To globally configure multiple port mirroring: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Mirroring > Multiple Port Mirroring. 5. Select the number of the port mirroring session ID from the Session ID list. The number of sessions allowed is platform specific. 6. Select the Administrative Mode for the selected port mirroring session using the True (enabled) or False (disabled) radio button. Select the True option to enable Admin mode for the selected session. When a particular session is enabled, any traffic entering or leaving the source ports of the session is copied (mirrored) onto the corresponding destination port or a remote switched port analyzer (RSPAN) VLAN. By default, Admin mode is disabled (False). If the mode is False (disabled), the configured source is not mirroring traffic to the destination. 7. From the Destination Port list, select the destination interface to which port traffic is to be copied. You can configure only one destination port on the system. It acts as a probe port and receives traffic from all configured source ports. If the value is not configured, it is shown as None. The default value is None. Monitor the Switch and Network 655 User Manual