Netgear XSM4324FS User Manual - Page 452

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 172. Multicast Mroute Table (continued) Field Protocol Flags Description The multicast routing protocol which created this entry. The possible values are as follows: • PIM-DM • PIM-SM The value displayed in this field is valid if the multicast routing protocol running is PIM-SM. The possible values are RPT or SPT. For other protocols a - (hyphen) is displayed. Configure the IPv6 PIM Global Settings To configure the IPv6 PIM global settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 Multicast > IPv6 PIM > Global Configuration. 5. Select an Admin Mode radio button. The options are Disable, or the protocol variant of PIM option, dense mode (PIM-DM) or sparse mode (PIM-SM). By default, this setting is disabled. The Disable option sets the administrative status of PM in the router to active or inactive. 6. Click the Apply button. Your settings are saved. Configure Multicast Routing 452 User Manual