Netgear XSM4324FS User Manual - Page 536

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure Console Port Access To configure the console port: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Access > Console Port. 5. In the Serial Port Login Timeout (minutes) field, specify how many minutes of inactivity occur on a serial port connection before the switch closes the connection. Enter a number between 0 and 160. The factory default is 5. Entering 0 disables the time-out. 6. In the Baud Rate (bps) list, select the default baud rate for the serial port connection. You can choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 baud. The factory default is 115200 baud. 7. In the Login Authentication List list, select which authentication list to use when you log in through Telnet. The default value is defaultList. 8. In the Enable Authentication List list, select which authentication list to use when going into the privileged EXEC mode. The default value is enableList. Manage Switch Security 536 User Manual