Netgear XSM4324FS User Manual - Page 194

M4300 Intelligent Edge Series Fully Managed Stackable Switches 4. Select Switching> VLAN > Advanced > Protocol Based VLAN Group Configuration. 5. In the Group Name field, type a name for the new group. You can enter up to 16 characters. 6. In the Protocol field, select the protocols to be associated with the group. There are three configurable protocols: • IP. IP is a network layer protocol that provides a connectionless service for the delivery of data. • ARP. Address Resolution Protocol (ARP) is a low-level protocol that dynamically maps network layer addresses to physical medium access control (MAC) addresses. • IPX. The internetwork packet exchange (IPX) is a connectionless datagram network-layer protocol that forwards data over a network. 7. In the VLAN ID field, select the VLAN ID. It can be any number in the range of 1 to 4093. All the ports in the group assigns this VLAN ID to untagged packets received for the protocols that you included in this group. 8. Click the Add button. The protocol-based VLAN group is added to the switch. The following table describes the nonconfigurable information displayed on the page. Table 68. Protocol Based VLAN Group Field Group ID Ports Description A number used to identify the group created by the user. Group IDs are automatically assigned when a group is created by the user. Display all the member ports that belong to the group. Configure Protocol-Based VLAN Group Membership To configure protocol-based VLAN group membership: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Configure Switching Information 194 User Manual