Netgear XSM4324FS User Manual - Page 581

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. Use the IPv6SG Port Security menu to enable or disable the IPv6SG port security on the selected interface. If IPv6SG port security is enabled, then the packets are not forwarded if the sender MAC address is not in FDB table and it is not in the DHCP snooping binding database. To enforce filtering based on MAC address other required configurations are as follows: • Enable port-security globally. • Enable port-security on the interface level. IPv6SG port security cannot be enabled if IPv6SG is disabled. The factory default is Disable. Also, you are not allowed to turn off IPv6SG port security while IPv6SG is enabled. 8. Click the Apply button. Your settings are saved. Configure an IPv6 Source Guard Binding To configure an IPv6 source guard static binding: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Control > IPv6 Source Guard > Binding Configuration. 5. From the Interface menu, select the interface to add a binding into the IPv6SG database. 6. In the MAC Address field, specify the MAC address for the binding. Manage Switch Security 581 User Manual