Netgear XSM4324FS User Manual - Page 430

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 160. DVMRP Route (continued) Field Interface Metric Expiry Time Up Time Description The interface on which IP datagrams sent by these sources are received. A value of 0 typically means the route is an aggregate for which no next-hop interface exists. The distance in hops to the source subnet. The amount of time remaining before this prune expires at the upstream neighbor. If no prune messages were received from downstream neighbors, this is set to value of the default prune lifetime timer, otherwise it is set to the smallest received value or the default timer, whichever is less. The time since the route represented by this entry was learned by the router. Configure Multicast IGMP Settings You can configure IGMP settings and view IGMP statistics. Configure IGMP Global Settings To configure the IGMP global settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > IGMP > Global Configuration. 5. In the Admin Mode field, select the Enable or Disable option. This sets the administrative status of IGMP in the router to active or inactive. The default is Disable. Configure Multicast Routing 430 User Manual