Netgear XSM4324FS User Manual - Page 348

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure Router Discovery To configure router discovery: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Router Discovery > Router Discovery Configuration. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure. 6. Use Advertise Mode to select Enable or Disable. If you select Enable, router advertisements are transmitted from the selected interface. 7. Use Advertise Address to select Enable or Disable. If you select Enable, router advertisements are transmitted from the selected interface. 8. Use Maximum Advertise Interval to enter the maximum time (in seconds) allowed between router advertisements sent from the interface. 9. Use Minimum Advertise Interval to enter the minimum time (in seconds) allowed between router advertisements sent from the interface. The value must be in the range of 3 to 1800. The default value is 450.000000. 10. Use Advertise Lifetime to enter the value (in seconds) to be used as the lifetime field in router advertisements sent from the interface. Manage Routing 348 User Manual