Netgear XSM4324FS User Manual - Page 435
View the IGMP Membership, admin, Login, Routing > Multicast > IGMP > IGMP Membership
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 435 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 162. Multicast IGMP Groups (continued) Field Up Time Expiry Time Version 1 Host Timer Version 2 Host Timer Compatibility Filter Mode Description The time elapsed since this entry was created. The minimum amount of time remaining before this entry is aged out. The time remaining until the local router assumes that no IGMP version 1 members are on the IP subnet attached to this interface. When an IGMPv1 membership report is received, this timer is reset to the group membership timer. While this timer is non-zero, the local router ignores any IGMPv2 leave messages for this group that it receives on the selected interface. This field is displayed only if the interface is configured for IGMP version 1. The time remaining until the local router assumes that no IGMP version 2 members are on the IP subnet attached to this interface. When an IGMPv2 membership report is received, this timer is reset to the group membership timer. While this timer is non-zero, the local router ignores any IGMPv1 and IGMPv3 leave messages for this group that it receives on the selected interface. This field is displayed only if the interface is configured for IGMP version 2. This parameter shows group compatibility mode (v1, v2, and v3) for this group on the specified interface. The source filter mode (Include, Exclude, or NA) for the specified group on this interface. When NA mode is active, the field is blank. View the IGMP Membership To view the IGMP membership: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > IGMP > IGMP Membership. Configure Multicast Routing 435 User Manual