Netgear XSM4324FS User Manual - Page 109

M4300 Intelligent Edge Series Fully Managed Stackable Switches 4. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Interface Statistics. The following table describes the DHCP L2 Relay Interface Statistics fields. Table 40. DHCP L2 Relay Interface Statistics Field Description Interface Shows the interface from which the DHCP message is received. UntrustedServerMsgsWithOpt82 Shows the number of DHCP message with option82 received from an untrusted server. UntrustedClientMsgsWithOpt82 Shows the number of DHCP message with option82 received from an untrusted client. TrustedServerMsgsWithoutOpt82 Shows the number of DHCP message without option82 received from a trusted server. TrustedClientMsgsWithoutOpt82 Shows the number of DHCP message without option82 received from a trusted client. Configure UDP Relay Global Settings To configure UDP relay global settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Services > UDP Relay > UDP Relay Global Configuration. Configure System Information 109 User Manual