Netgear XSM4324FS User Manual - Page 351

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. In the Global Configuration Admin Mode field, set the administrative status of VRRP in the router by selecting the Enable or Disable radio button. By default, VRRP is disabled. 6. Select the VRID. The VRID field is configurable only if you are creating a new virtual router. The valid values are 1 to 255. 7. Select the unit/slot/port for the new virtual router from the Interface menu. 8. In the Pre-empt Mode field, select the Enable or Disable option. If you select Enable, a backup router preempts the master router if it has a priority greater than the master virtual router's priority, provided the master is not the owner of the virtual router IP address. The default is Enable. 9. In the Accept Mode field, select the Enable or Disable option. If you select Enable, the VRRP master accepts all types of data packets addressed to IP addresses associated with the virtual router. If you select Disable, the VRRP master discards all types of data packets addressed to IP addresses associated with the virtual router, if it is not the IP address owner. The default is Disable. 10. In the Configured Priority field, enter the to be used by the VRRP router in the election for the master virtual router. The valid values are 1 to 254. If the virtual IP address is the same as the interface IP address, the priority gets set to 254, no matter what you enter. 11. In the Advertisement Interval field, enter the time, in seconds, between the transmission of advertisement packets by this virtual router. Manage Routing 351 User Manual