Netgear XSM4324FS User Manual - Page 629
View and Delete IP ACL Bindings in the IP ACL Binding Table, Sequence Number, Unit 1, Apply
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 629 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. Specify an optional Sequence Number to indicate the order of this access list relative to other access lists already assigned to this interface and direction. A low number indicates high precedence order. If a sequence number is already in use for this interface and direction, the specified access list replaces the currently attached access list using that sequence number. If you do not specify the sequence number (meaning that the value is 0), a sequence number that is one greater than the highest sequence number currently in use for this interface and direction is used. The valid range is 1-4294967295. 8. From the Unit 1, Unit 2, Unit 3, and LAG switch figures onscreen, select the ports and LAGs to which the rule must apply. If a port or LAG is not selected, click the port or LAG to select it. If a port or LAG is selected, click the port or LAG to clear it again. 9. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information displayed on the page. Table 219. IP Binding Configuration Field Interface Direction ACL Type ACL ID/Name Sequence Number Description Displays the selected interface. Displays the selected packet filtering direction for the ACL. The type of ACL assigned to the selected interface and direction. The ACL number (in the case of IP ACL) or ACL name (in the case of named IP ACL and IPv6 ACL) identifying the ACL assigned to selected interface and direction. The sequence number signifying the order of specified ACL relative to other ACLs assigned to selected interface and direction. View and Delete IP ACL Bindings in the IP ACL Binding Table To view and delete IP ACL bindings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. Manage Switch Security 629 User Manual