Netgear XSM4324FS User Manual - Page 253

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the nonconfigurable MLD Snooping Configuration fields. Table 91. MLD Snooping Configuration Field Multicast Control Frame Count Interfaces Enabled for MLD Snooping VLAN IDs Enabled For MLD Snooping Definition The number of multicast control frames that have been processed by the CPU. One or more interfaces on which MLD snooping is administratively enabled. MLD snooping must be enabled globally and on an interface for the interface to be able to snoop MLD packets to determine which segments should receive multicast packets directed to the group address. Displays one or more VLANs on which MLD snooping is administratively enabled. Configure an MLD Snooping Interface To configure an MLD snooping interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> Multicast > MLD Snooping > Interface Configuration. All physical, VLAN, and LAG interfaces are displayed. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. Configure Switching Information 253 User Manual