Netgear XSM4324FS User Manual - Page 611

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the information displayed in the MAC Binding Table. Table 217. MAC Binding Table Field Interface Direction ACL Type ACL ID Sequence Number Description The interface of the ACL assigned. The selected packet filtering direction for the ACL. The type of ACL assigned to selected interface and direction. The ACL name identifying the ACL assigned to selected interface and direction. The sequence number signifying the order of the specified ACL relative to other ACLs assigned to selected interface and direction. Configure an IP ACL An IP or IPv6 ACL consists of a set of rules that are matched sequentially against a packet. When a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken, and the additional rules are not checked for a match. You must specify the interfaces to which an IP ACL applies, as well as whether it applies to inbound or outbound traffic. Rules for the IP ACL are specified or created using the IPv6 ACL Rule Configuration page. To configure an IP ACL: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > ACL > Advanced > IP ACL. Manage Switch Security 611 User Manual