Netgear XSM4324FS User Manual - Page 463
Routing > IPv6 Multicast > MLD > MLD Groups, Search, Interface, Group, Refresh
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 463 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches The System Information page displays. 4. Select Routing> IPv6 Multicast > MLD > MLD Groups. 5. Use the Search menu to search for multicast entries by interface or group: • Select Interface from menu, enter the interface in unit/slot/port format (for example 1/0/13), and click the Go button. If the entry exists, it is displayed as the first entry, followed by the remaining entries. • Select Group from the menu, enter the MLD group IP address, and click the Go button. If the entry exists, it is displayed as the first entry, followed by the remaining entries. An exact match is required. 6. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 178. IPv6 Multicast MLD Groups Field Interface Group IP Last Reporter Up Time Expiry Time Filter Mode Version 1 Host Timer Group Compat Mode Source Hosts Source Address (Expiry Time) Description The interface for which data is to be displayed. The address of the MLD members. The IP address of the source of the last membership report received for this multicast group address on the selected interface. The time elapsed in seconds since the multicast group was known. Time left in seconds before the entry is removed from the MLD membership table of this interface. The filter mode of the multicast group on this interface. Possible values are Include and Exclude. The time remaining until the router assumes that there are no longer any MLD version 1 hosts on the specified interface. The compatibility mode of the multicast group on the interface. The values it can take are MLDv1 and MLDv2. This parameter shows source addresses that are members of this multicast address. This parameter shows expiry time interval against each source address that is a member of this multicast group. This is the amount of time after which the specified source entry is aged out. Configure Multicast Routing 463 User Manual