Netgear XSM4324FS User Manual - Page 43

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. Configure the Falling Threshold. Notification is triggered when the total CPU utilization falls below this level for a configured period of time. The falling utilization threshold must be equal to or less than the rising threshold value. The falling utilization threshold notification is made only if a rising threshold notification was done previously. Configuring the falling utilization threshold and time period is optional. If the Falling CPU utilization parameters are not configured, then it takes the same value as Rising CPU utilization parameters. The range is 1 to 100. 8. Configure the Falling Interval. The utilization monitoring time period can be configured from 5 seconds to 86400 seconds in multiples of 5 seconds. 9. Configure the CPU Free Memory Threshold value in KB. 10. Click the Apply button. Your settings are saved. View and Clear Switch Statistics To view and clear the switch statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Switch Statistics. Configure System Information 43 User Manual