Netgear XSM4324FS User Manual - Page 628

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure IP ACL Interface Bindings When an ACL is bound to an interface, all the rules that are defined are applied to the selected interface. You can assign ACL lists to ACL priorities and interfaces. To configure IP ACL interface bindings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > ACL > Advanced > IP Binding Configuration. 5. From the ACL ID menu, select an IP ACL. Note: Binding ACLs to interface fails when the system has no resources to bind a new ACL. IPv4 ACLs and IPv6 ACLs cannot be bound at the same time to an interface. 6. Select the packet filtering Direction for ACL. Valid directions are Inbound or Outbound. The packet filtering direction for ACL is Inbound, which means the IP ACL rules are applied to traffic entering the port. Manage Switch Security 628 User Manual