Netgear XSM4324FS User Manual - Page 124

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 43. Nonconfigurable fields on the basic PoE Configuration page (continued) Field Power Source Consumed Power Description The source of the system power. Total power in watts that is being delivered to all ports. Configure PoE Ports To configure PoE ports: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > PoE > Advanced > PoE Port Configuration. 5. Select one ore more ports by selecting the check boxes. 6. From the Port Power menu, select Enable or Disable to specify whether the port can deliver power. 7. Use the Port Priority menu to specify which ports can still deliver power if the total power delivered by the switch exceeds a specific threshold. If the switch cannot supply power to all connected devices, the port priority determines which ports can still supply power. The lowest numbered ports with the same port priority setting are given higher priority. Select one of the following priorities: • Low. Low priority • Medium. Medium priority • High. High priority • Critical. Critical priority 8. From the Power Mode menu, select one of the following options: • 802.3af. Specifies that the port is powered in the IEEE 802.3af mode. For example, if the class detected by the switch is not class 4, the switch port does not power up the PD. Configure System Information 124 User Manual