Netgear XSM4324FS User Manual - Page 404

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 145. Advanced OSPFv3 Interface Configuration (continued) Field Designated Router Backup Designated Router Number of Link Events Description The identity of the designated router for this network, in the view of the advertising router. The designated router is identified here by its router ID. The value 0.0.0.0 means that there is no designated router. Note: This field displays only if the OSPFv3 admin mode is enabled. The identity of the backup designated router for this network, in the view of the advertising router. The backup designated router is identified here by its router ID. Set to 0.0.0.0 if there is no backup designated router. Note: This field displays only if the OSPFv3 admin mode is enabled. This is the number of times the specified OSPF interface changed its state. Note: This field displays only if the OSPFv3 admin mode is enabled. View and Clear OSPFv3 Interface Statistics You can view and clear statistics for the selected interface. The information is displayed only if OSPFv3 is enabled. To view and clear the OSPFv3 interface statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > OSPFv3 > Advanced > Interface Statistics. Configure OSPF and OSPFv3 404 User Manual