Netgear XSM4324FS User Manual - Page 211

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. In the TCP Port field, specify the TCP port for the target that monitors iSCSI traffic. Up to 16 TCP ports can be defined in the system. The well-known iSCSI ports 860 and 3260 are configured as defaults but you can remove them as any other configured target. 6. In the IP address field, specify an IP address for the target that monitors iSCSI traffic. The default is 0.0.0.0. 7. In the Target Name field, specify a name to assign to the target. The iSCSI Target Name can be up to 233 characters in length. 8. Click the Add button. The iSCSI targets configuration is added. View iSCSI Sessions To view information about active iSCSI sessions: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching > iSCSI > Advanced > Sessions. Configure Switching Information 211 User Manual